Testing Machines for



Cod.BPS25DW BPS25DW is a Test Stand for burst test or pressurize test of flexible hoses, pipes, fitting, quick couplings, valves, etc..
The Test Stand uses water, it is not possible to use water glycol.
The machine with its optional is able to run:
- burst and/or pressurize tests;
- variation in length test (ISO1402)
- proof test
This unit uses a special hydraulic circuit with which it can create a test cycle composed by stationary phases and pressure ramps with controlled pressure gradient according with the following Norms:
SAEJ343 - DIN20024 - ISO18869 - ISO1402.
The connection system is composed by two manifolds, one of them is fix and the other is mobile, the mobile manifold is installed on a heavy duty guide able to withstand the forces due to the burst. All fittings type can be firmly fixed to the manifolds, it is enough to use suitable and appropriate adapters not included in this offer. It is necessary to pay attention on the total volume of the component under test; the volume of the components has to stand within the maximum test stand performances in order to obtain the whished pressure gradient.

- Low pressure Test: from 20 (290) up to 300 (4,351) bar (psi)
- High pressure Test: from 70 (1,015) up to 2.500 (36,250) bar (psi) Request Info